under some conditions, the mmap syscall wrongly fails with EPERM
instead of ENOMEM when memory is exhausted; this is probably the
result of the kernel trying to fit the allocation somewhere that
crosses into the kernel range or below mmap_min_addr. in any case it's
a conformance bug, so work around it. for now, only handle the case of
anonymous mappings with no requested address; in other cases EPERM may
be a legitimate error.
this indirectly fixes the possibility of malloc failing with the wrong
errno value.
GLOB_PERIOD is a gnu extension, and GNU glob does not seem to honor it
except in the last path component. it's not clear whether this a bug
or intentional, but it seems reasonable that it should exclude the
special entries . and .. when walking.
changes based on report and analysis by Julien Ramseier.
some applications use getservbyport to find port numbers that are not
assigned to a service; if getservbyport always succeeds with a numeric
string as the result, they fail to find any available ports.
POSIX doesn't seem to mandate the behavior one way or another. it
specifies an abstract service database, which an implementation could
define to include numeric port strings, but it makes more sense to
align behavior with traditional implementations.
based on patch by A. Wilcox. the original patch only changed
getservbyport[_r]. to maintain a consistent view of the "service
database", I have also modified getservbyname[_r] to exclude numeric
port strings.
if the parent thread was able to set the new thread's priority before
it reached the check for 'startlock', the new thread failed to restore
its signal mask and thus ran with all signals blocked.
concept for patch by Sergei, who reported the issue; unnecessary
changes were removed and comments added since the whole 'startlock'
thing is non-idiomatic and confusing. eventually it should be replaced
with use of idiomatic synchronization primitives.
the DFA table controlling accepted ranges for the f4 prefix used an
incorrect upper bound of 0xa0 where it should have been 0x90, allowing
such sequences to be accepted and decoded as non-Unicode-scalar values
0x110000 through 0x11ffff.
the value computed as an output limit that bounds the amount of input
consumed below the input limit was incorrectly being used as the
actual amount of input consumed. instead, compute the actual amount of
input consumed as a difference of pointers before and after the
conversion.
patch by Mikhail Kremnyov.
passing to pthread_join the id of a thread which is not joinable
results in undefined behavior.
in principle the check to trap does not necessarily work if
pthread_detach was called after thread creation, since no effort is
made here to synchronize access to t->detached, but the check is
well-defined and harmless for callers which did not invoke UB, and
likely to help catch erroneous code that would otherwise mysteriously
hang.
patch by William Pitcock.
neither current compilers nor linkers treat protected visibility the
way I expected, as having fixed source-level semantics rather than
being dependent on target-specific ABI details, and change seems
unlikely. while the use here does not actually depend on the specific
semantics, at least some versions of some linkers, especially lld,
refuse to allow linking to a libc.so where the symbols have protected
visibility. this cannot be detected at configure-time because linking
libc.so itself works fine, and because even if we could test linking
an application against libc.so successfully, we could not justifiably
assume that the same linker used to link libc.so would also be used
later to link applications.
disable the vis.h hack by default at the configure level, but add an
explicit "auto" option to request the old configure-time detection
rather than just removing it. this leaves it easy to evaluate whether
it actually resulted in significant size or performance benefits while
ensuring that out-of-the-box builds are not unlinkable for some users.
fortunately, preliminary evaluation suggests that at least x86_64,
arm, and aarch64 don't suffer at all from the change, and impact on
other archs is low. if low is not low enough, it should not be hard to
analyze where the significant PLT call ABI costs are present and
mitigate them without the hack.
since setlocale(cat, NULL) is required to return the setting for the
global locale, there is no standard mechanism to obtain the name of
the currently active thread-local locale set by uselocale. this makes
it impossible for application/library software to load appropriate
translations, etc. unless using the gettext implementation provided by
libc, which has privileged access to libc internals.
to fill this gap, glibc introduced the _NL_LOCALE_NAME macro which can
be used with nl_langinfo to obtain the name. GNU gettext/gnulib code
already use this functionality on glibc, and can easily be adapted to
make use of it on non-glibc systems if it's available; for other
systems they poke at locale implementation internals, which we want to
avoid. this patch provides a compatible interface to the one glibc
introduced.
previously, the pathname used to load the program was always used as
argv[0]. the default remains the same, but a new --argv0 option can be
used to provide a different value.
a null pointer for a library's deps list was ambiguous: it could
indicate either no dependencies or that the dependency list had not
yet been populated. inability to distinguish could lead to spurious
work when dlopen is called multiple times on a library with no deps,
and due to related bugs, could actually cause other libraries to
falsely appear as dependencies, translating into false positives for
dlsym.
avoid the problem by always initializing the deps pointer, pointing to
an empty list if there are no deps. rather than wasting memory and
introducing another failure path by allocating an empty list per
library, simply share a global dummy list.
further fixes will be needed for related bugs, and much of this code
may end up being replaced.
while the official elfv2 abi for "powerpc64le" sets power8 as the
baseline isa, we use it for both little and big endian powerpc64
targets and need to maintain compatibility with pre-power8 models. the
instructions for sqrt, fabs, and fma are in the baseline isa; support
for the rest is conditional via predefined isa-level macros.
patch by David Edelsohn.
these were introduced in z196 and not available in the baseline (z900)
ISA level. use __HTM__ as an alternate indicator for ISA level, since
gcc did not define __ARCH__ until 7.x.
patch by David Edelsohn.
POSIX requires ctime_r return a null pointer on failure, which can
occur if the input time_t value is not representable in broken down
form.
based on patch by Alexander Monakov.
these functions return an error code, and are not explicitly
documented to set errno, but they are nonstandard and the historical
implementations do set errno as well, and some applications expect
this behavior. do likewise for compatibility.
patch by Rudolph Pereira.
ctime passes the result from localtime directly to asctime. But in case
of error, localtime returns 0. This causes an error (NULL pointer
dereference) in asctime.
based on patch by Omer Anson.
mremap seems to always fail on nommu, and on some non-Linux
implementations of the Linux syscall API, it at least fails to
increase allocation size, and may fail to move (i.e. defragment) the
existing mapping when shrinking it too. instead of failing realloc or
leaving an over-sized allocation that may waste a large amount of
memory, fallback to malloc-memcpy-free if mremap fails.
the check to prevent matching empty string wrongly blocked matching
of "/" due to checking emptiness after stripping leading slashes
rather than checking the full original argument string.
simplified from patch by Julien Ramseier.
when using the sh4a opcodes, the assembler tags the resulting object
file as requiring sh4a. the linker then refuses to (static) link it
with object files marked as requiring j2, since there is no isa level
that includes both sh4a and j2 instructions.
at one point, clang reportedly failed to support the asm register
constraints needed for inline syscalls. versions of clang that old
have much bigger problems that preclude using them to compile musl
libc.
mips64 requires 'struct stat' conversion due to incorrect 32-bit
fields where time_t should be in the kernel version of the structure.
syscall_arch.h already performed the correct translation for stat,
fstat, and lstat syscalls, but omitted special handling for fstatat.
there was missing reverse-conversion logic for the case, handled
specially in the character set tables, where a byte represents a
unicode codepoint with the same value.
this patch adds code to handle the case, and refactors the two-level
10-bit table lookup for legacy character sets into a function to avoid
repeating it yet another time as part of the fix.
per POSIX, EINVAL is not a mandatory error, only an optional one. but
reporting unsupported flags allows an application to fallback
gracefully when a requested feature is not supported. this is not
helpful now, but it may be in the future if additional flags are
added.
had this checking been present before, applications would have been
able to check for the newly-added POSIX_SPAWN_SETSID feature (added in
commit bb439bb171) at runtime.
the bit is reserved anyway for ABI-compat reasons; this documents it
and makes it so we can have posix_spawnattr_setflags check for flag
validity without hard-coding an anonymous bit value.
the code being removed was written to optimize for size assuming the
compiler cannot collapse code paths for different types with the same
underlying representation. modern compilers sometimes succeed in
making this optimization themselves, but either way it's a small size
difference and not worth the source-level complexity or the UB
involved in this hack.
some incorrect use of va_arg still remains, particularly use of void *
where the actual argument has a different pointer type. fixing this
requires some actual code additions, rather than just removing cruft,
so I'm leaving it to be done later as a separate commit.
commit 0a950dcf15 added checking that
the pathname a tty device was opened with actually matches the device,
which can fail to hold when a container inherits a tty from outside
the container. the error code added at the time was ENOENT; however,
discussions between affected applications and glibc developers
resulted in glibc adopting ENODEV as the error for this condition, and
this has now been documented in the man pages project as well. adopt
the same error code for consistency.
patch by Christian Brauner.
commit d6cb08bcac moved the code and
introduced an incorrect string offset for the new parsing, probably
due to a copy-and-paste error.
patch by Stefan Sedich.
normally 32-bit archs use the mmap2 syscall and are limited to an
offset of 2^32 pages. however some 32-bit archs (mainly ILP32-on-64
ones like x32) have 64-bit syscall argument slots and thus can accept
the full range. don't artifically limit them.
analogous to commit 5bf7eba213, use of
AT_PHDR/PT_PHDR does not actually work to find the program base, and
the method with _DYNAMIC vs PT_DYNAMIC must be used as an alternative.
patch by Shiz, along with testing to confirm that this fixes unwinding
in static PIE.
due to testing buf[i].family==AF_INET before checking i==cnt, it was
possible to read past the end of the array, or past the valid part. in
practice, without active bounds/indeterminate-value checking by the
compiler, the worst that happened was failure to return early and
optimize out the sorting that's unneeded for v4-only results.
returning on i==cnt-1 rather than i==cnt would be an alternate fix,
but the approach this patch takes is more idiomatic and less
error-prone.
patch by Timo Teräs.
the old limit was one byte too short to support locale names of the
form xx_XX.UTF-8@modifier where modifier is more than 3 bytes, a form
which various real-world locale names take. the problem could be
avoided by omitting the useless ".UTF-8" part, but users may need to
have it present when operating on mixed-libc systems or when it will
be carried over (e.g. across ssh) to other systems.
the new limit is chosen sufficient for existing/reasonable locale
names while still keeping the size of setlocale's static buffer small.
also add locale_impl.h to the Makefile's list of headers which force
rebuild of source files, to prevent dangerously inconsistent object
files from getting used after this change.
often translations will be named only by language, whereas locale
names may also include a territory code, modifier, and codeset
portion. previously, only translations exactly matching the locale
name were loaded. this was a major usability issue, requiring
workarounds like symlinks or tweaking of the locale name.
with these changes, gettext now searches for translations by first
removing the codeset portion of the locale name, then trying the
remainder in full, with modifier (@mod) removed, with territory code
(_XX) removed, and with both removed.
part of the reason gettext lacked support for searching fallbacks
before is that the candidate pathname for a translation file was
constructed on each call and used as the key to lookup an
already-mapped translation file. this was very costly/inefficient. we
now use the tuple of textdomain binding pointer, locale map pointer,
and integer category id as the key for looking up a translation file
mapping.
based on patch by He X.
when called for LC_ALL, setlocale has to return a string representing
the state of all locale categories. the simplest way to do this was to
always return a delimited list of values for each category, but that's
not friendly in the fairly common case where all categories have the
same setting. He X proposed a patch to check for this case and return
a single name; this patch is a simplified approach to do the same.
commit 4ff234f6cb erroneously changed
the condition for running certain code at dlopen time to check whether
the library was already relocated rather than whether it already had
its deps[] table filled. this was out of concern over whether the code
under the conditional would be idempotent/safe to call on an
already-loaded libraries. however, I missed a consideration in the
opposite direction: if a library was loaded at program startup rather
than dlopen, its deps[] table was not yet allocated/filled, and
load_deps needs to be called at dlopen time in order for dlsym to be
able to perform dependency-order symbol lookups.
in order to avoid wasteful allocation of lazy-binding relocation
tables for libraries which were already loaded and relocated at
startup, the check for !p->relocated is not deleted entirely, but
moved to apply only to allocation of these dables.
the time of day at which daylight time switches over is specified in
local time in the dst state prior to the transition. the code for
handling this wrongly assumed it needed to switch whether dst or
standard offset is applied to the transition time when the dst end
date is before the dst start date (souther hemisphere summer), but in
fact the end transition time should always be adjusted for dst, and
the start transition time should always be adjusted for standard time.
this change was suggested based on testing done by Timo Teräs almost
two years ago; the branch (and probably call prep overhead) in the
inner loop was found to contribute noticably to total symbol lookup
time. this change will make lookup slightly slower if libraries were
built with only the traditional "sysv" ELF hash table, but based on
how much slower lookup tends to be without the gnu hash table, it
seems reasonable to assume that (1) users building without gnu hash
don't care about dynamic linking performance, and (2) the extra time
spent computing the gnu hash is likely to be dominated by the slowness
of the sysv hash table lookup anyway.
such loading is unsafe, and can happen when programs use their own
logic to locate a .so file then pass the absolute pathname to dlopen,
or if an absolute pathname ends up in DT_NEEDED headers. multiple
loads with only the base name were already precluded, provided libc
was named appropriately, by special-casing standard library names.
one function symbol (in the reserved namespace, but public, since it's
part of the crt1 entry point ABI) and one data symbol are checked.
this way we avoid likely false positives, particularly from libraries
interposing and wrapping functions. there is no hard requirement to
avoid breaking such usage, since trying to run a hook before libc is
even initialized is not a supported usage case, but it's friendlier
not to break things.
the fix in commit c3edc06d1e for
CVE-2016-8859 used gotos to exit on overflow conditions, but the code
in that error path assumed the buffer pointer was valid or null. thus,
the conditions which previously led to under-allocation and buffer
overflow could instead lead to an invalid pointer being passed to
free.
traditional lazy relocation with call-time plt resolver is
intentionally not implemented, as it is a huge bug surface and demands
significant amounts of arch-specific code and requires ongoing
maintenance to ensure compatibility with applications which make use
of new additions to the arch's register file in passing function
arguments.
some applications, however, depend on the ability to dlopen modules
which have unsatisfied symbol references at the time they are loaded,
either avoiding use of the affected interfaces or manually loading
another module to provide the missing definition via their own module
dependency tracking outside the ELF data structures. while such usage
is non-conforming, failure to support it has been a significant
obstacle for users/distributions trying to support affected software,
particularly the X.org server.
instead of resolving lazy relocations at call time, this patch saves
unresolved GOT/PLT relocations for deferral and retries them after
each subsequent dlopen until they are resolved. since dlopen is the
only time at which the effective global symbol table can change, this
behavior is not observably different from traditional lazy binding,
and the required code is minimal.
when loading libraries with dlopen, the caller can request that the
library's symbols become part of the global symbol table, or that they
only be used for resolving relocations in the loaded library and its
dependencies. in the latter case, a subsequent dlopen of the same
library can upgrade it to global status.
previously, if a library was upgraded from local to global mode, its
symbols entered the symbol lookup search order at the point where the
library was originally loaded. this means that a new call to dlopen
could change the value of a symbol that already had a visible
definition, an inconsistency which applications could observe.
POSIX is unclear whether this should happen or whether it's permitted
to happen, but the resolution of Austin Group issue #982 made it
formally unspecified.
with this patch, a library whose mode is upgraded from local to global
enters the symbol lookup order at the point where it was made global,
so that symbol resolution before and after the upgrade are consistent.
in order to implement this change, the per-dso global flag is replaced
with a separate set of linked-list pointers for participation in the
global symbol table. this permits the order of dso objects for symbol
resolution to differ from the order used for iteration of all loaded
libraries. it also improves performance of find_sym, by avoiding a
branch per iteration and skipping, and especially in the case where
many non-global libraries have been loaded, by allowing the loop to
skip over them entirely. logic for temporarily adding non-global
libraries to the symbol table for relocation purposes is also mildly
simplified.
the 32-bit pc-relative address for stage 2 of dynamic linker entry was
wrongly loaded with a zero-extending load instead of sign-extending
load, resulting in an invalid jump if the offset happened to be
negative, which depends on the linker's ordering of text sections.
the ABI for arm was silently changed at some point to allow page sizes
other than 4k; traditional binaries built with only 4k-aligned offsets
between load segments cannot run on such systems, but newer binutils
versions use 64k offset alignment.
while larger page size is undesirable for various reasons, users have
encountered hardware and/or kernels that lock the page size to a
larger value, so follow the new ABI and allow it to vary.
binutils commit bada43421274615d0d5f629a61a60b7daa71bc15 tightened
immediate fixup handling in gas in such a way that the final .arch of
an object file must be compatible with the fixups used when the
instruction was assembled; this in turn broke assembling of atomics.s,
at least in thumb mode.
it's not clear whether this should be considered a bug in gas, but
.object_arch is preferable anyway for our purpose here of controlling
the ISA level tag on the object file being produced, and it's the
intended directive for use in object files with runtime code
selection. research by Szabolcs Nagy confirmed that .object_arch is
supported in all relevant versions of binutils and clang's integrated
assembler.
patch by Reiner Herrmann.
the plural_rule field of allocated msgcat structures was assumed to be
initially-null but was never initialized. for future-proofing, the
nplurals field which was left uninitialized should also be cleared.
likewise, in the binding structure, the active field could be used
uninitialized by a technicality: the a_store which stores the initial
value of 0 may be implemented as a cas operation, which reads the old
value.
rather than fixing these issues individually, just use calloc for both
allocations. this does result in wasteful clearing of name buffers (up
to NAME_MAX+PATH_MAX) before filling them, but since the size if
bounded and the time is dominated by filesystem operations, it really
doesn't matter; simplicity and future-proofing have more value here.
modified from patch submitted by He X.
this loop was only supposed to deactivate other bindings for the same
text domain name, but due to copy-and-paste error, deactivated all
other bindings.
patch by He X.
commit 78a8ef47c4 inadvertently removed
the SA_RESTART flag from the sigaction for the internal signal handler
used by __synccall for broadcasting. as a result, programs which did
not use interrupting signals but which used set*id() in a
multithreaded context could wrongly observe EINTR errors they're not
prepared to handle.
commit d56460c939 introduced this
regression as part of splitting the tls module list out of the dso
list. the new code added to dlopen's failure path to undo the changes
adding the partially-loaded libraries reset the tls_tail pointer
correctly, but did not clear its link to the next list entry. thus, at
least until the next successful dlopen, the list was not terminated
but ended with an invalid next pointer, which __copy_tls attempted to
follow when a new thread was created.
patch by Mikael Vidstedt.
ISO C and POSIX only specify behavior for base arguments of 0 and
2-36; POSIX mandates an EINVAL error for unsupported bases. it's not
clear that there's a requirement for implementations not to "support"
additional bases as an extension, but "base 1" did not work in any
meaningful way anyway, so it should be considered unsupported and thus
an error.
getopt is only specified to modify optopt on error, and some software
apparently infers an error from optopt!=0.
getopt_long is changed analogously. the resulting behavior differs
slightly from the behavior of the GNU implementation of getopt_long,
which keeps an internal shadow copy of optopt and copies it to the
public one on return, but since the GNU implementation also exhibits
this shadow-copy behavior for plain getopt where is is non-conforming,
I think this can reasonably be considered a bug rather than an
intentional behavior that merits mimicing.
when _GNU_SOURCE is defined, which is always the case when compiling
c++ with gcc, these macros for the the indices in gregset_t are
exposed and likely to clash with applications. by using enum constants
rather than macros defined with integer literals, we can make the
clash slightly less likely to break software. the macros are still
defined in case anything checks for them with #ifdef, but they're
defined to expand to themselves so that non-file-scope (e.g.
namespaced) identifiers by the same names still work.
for the sake of avoiding mistakes, the changes were generated with sed
via the command:
sed -i -e 's/#define *\(REG_[A-Z_0-9]\{1,\}\) *\([0-9]\{1,\}\)'\
'/enum { \1 = \2 };\n#define \1 \1/' \
arch/i386/bits/signal.h arch/x86_64/bits/signal.h arch/x32/bits/signal.h
commit 0dc99ac413 added input length
checking to avoid unsafe VLA allocation, but put it in the wrong
place, before the glob_t structure was zeroed out. while POSIX isn't
clear on whether it's permitted to call globfree after glob failed
with GLOB_NOSPACE, making it safe is clearly better than letting
uninitialized pointers get passed to free in non-conforming callers.
while we're fixing this, change strlen check to the idiomatic strnlen
version to avoid unbounded input scanning before returning an error.
commit 583ea83541 fixed the case where
tm_year is negative but the resulting year (offset by 1900) was still
positive, which is always the case for time_t values that fit in 32
bits, but not for arbitrary inputs.
based on an earlier patch by Julien Ramseier which was overlooked at
the time the previous fix was applied.
the static-linked version of __init_tls needs to locate the TLS
initialization image via the ELF program headers, which requires
determining the base address at which the program was loaded. the
existing code attempted to do this by comparing the actual address of
the program headers (obtained via auxv) with the virtual address for
the PT_PHDR record in the program headers. however, the linker seems
to produce a PT_PHDR record only when a program interpreter (dynamic
linker) is used. thus the computation failed and used the default base
address of 0, leading to a crash when trying to access the TLS image
at the wrong address.
the dynamic linker entry point and static-PIE rcrt1.o startup code
compute the base address instead by taking the difference between the
run-time address of _DYNAMIC and the virtual address in the PT_DYNAMIC
record. this patch copies the approach they use, but with a weak
symbolic reference to _DYNAMIC instead of obtaining the address from
the crt_arch.h asm. this works because relocations have already been
performed at the time __init_tls is called.
all assembly is now thumb2-compatible. on existing targets this is at
best a size optimization, but it will also facilitate porting to
thumb2-isa-only arm variants.
three problems are addressed:
- use of pc arithmetic, which was difficult if not impossible to make
correct in thumb mode on all models, so that relative rather than
absolute pointers to the backends could be used. this was designed
back when there was no coherent model for the early stages of the
dynamic linker before relocations, and is no longer necessary.
- assumption that data (the relative pointers to the backends) can be
accessed at a constant displacement from the code. this will not be
possible on future fdpic subarchs (for cortex-m), so move
responsibility for loading the backend code address to the caller.
- hard-coded arm opcodes using the .word directive. instead, use the
.arch directive to work around the assembler's refusal to assemble
instructions not available (or in some cases, available but just
considered deprecated) in the target isa level. the obscure v6t2
arch is used for v6 code so as to (1) allow generation of thumb2
output if -mthumb is active, and (2) avoid warnings/errors for mcr
barriers that clang would produce if we just set arch to v7-a.
in addition, the __aeabi_read_tp function is moved out of the inner
workings and implemented as an asm wrapper around a C function, so
that asm code does not need to read global data. the asm wrapper
serves to satisfy the ABI calling convention requirements for this
function.
POSIX specifies the result to have signed 32-bit range. on 32-bit
archs, the implicit conversion to long achieved the desired range
already, but when long is 64-bit, a cast is needed.
patch by Ed Schouten.
this has been slated for removal for a long time. there is
fundamentally no way to implement stdarg without compiler assistance;
any attempt to do so has serious undefined behavior; its working
depends not just (as a common misconception goes) on ABI, but also on
assumptions about compiler code generation internal to a translation
unit, which is not subject to external ABI constraints.
gdb can only backtrace/unwind across signal handlers if it recognizes
the sa_restorer trampoline. for x86_64, gdb first attempts to
determine the symbol name for the function in which the program
counter resides and match it against "__restore_rt". if no name can be
found (e.g. in the case of a stripped binary), the exact instruction
sequence is matched instead.
when matching the function name, however, gdb's unwind code wrongly
considers the interval [sym,sym+size] rather than [sym,sym+size).
thus, if __restore_rt begins immediately after another function, gdb
wrongly identifies pc as lying within the previous adjacent function.
this patch adds a nop before __restore_rt to preclude that
possibility. it also removes the symbol name __restore and replaces it
with a macro since the stability of whether gdb identifies the
function as __restore_rt or __restore is not clear.
for the no-symbols case, the instruction sequence is changed to use
%rax rather than %eax to match what gdb expects.
based on patch by Szabolcs Nagy, with extended description and
corresponding x32 changes added.
alpha and s390x gratuitously use 64-bit entries (wasting 2x space and
cache utilization) despite the values always being 32-bit.
based on patch by Bobby Bingham, with changes suggested by Alexander
Monakov to use the public Elf_Symndx type from link.h (and make it
properly variable by arch) rather than adding new internal
infrastructure for handling the type.
commit 31fb174dd2 used
DEFAULT_GUARD_SIZE from pthread_impl.h in a static initializer,
breaking build on archs where its definition, PAGE_SIZE, is not a
constant. instead, just define DEFAULT_GUARD_SIZE as 4096, the minimal
page size on any arch we support. pthread_create rounds up to whole
pages anyway, so defining it to 1 would also work, but a moderately
meaningful value is nicer to programs that use
pthread_attr_getguardsize on default-initialized attribute objects.
based on patch by Timo Teräs:
While generally this is a bad API, it is the only existing API to
affect c++ (std::thread) and c11 (thrd_create) thread stack size.
This patch allows applications only to increate stack and guard
page sizes.
commit 33ce920857 broke pthread_create
in the case where a null attribute pointer is passed; rather than
using the default sizes, sizes of 0 (plus the remainder of one page
after TLS/TCB use) were used.
the linux kernel uapi headers provide their own definitions of the
structures from netinet/in.h, resulting in errors when a program
includes both the standard libc header and one or more of the
networking-related kernel headers that pull in the kernel definitions.
as before, we do not attempt to support the case where kernel headers
are included before the libc ones, since the kernel definitions may
have subtly incorrect types, namespace violations, etc. however, we
can easily support the inclusion of the kernel headers after the libc
ones, since the kernel headers provide a public interface for
suppressing their definitions. this patch adds the necessary macro
definitions for such suppression.
previously, the pthread_attr_t object was always initialized all-zero,
and stack/guard size were represented as differences versus their
defaults. this required lots of confusing offset arithmetic everywhere
they were used. instead, have pthread_attr_init fill in the default
values, and work with absolute sizes everywhere.
the swprintf write callback never reset its buffer pointers, so after
its 256-byte buffer filled up, it would keep repeating those bytes
over and over in the output until the destination buffer filled up. it
also failed to set the error indicator for the stream on EILSEQ,
potentially allowing output to continue after the error.
the value 19991006 for __RES implies availability of res_ninit and
related functions that take a resolver state argument; these are not
supported since our resolver is stateless. instead claim support for
just the older API by defining __RES to 19960801.
based on patch by Dmitrij D. Czarkoff.
the old snprintf design setup the FILE buffer pointers to point
directly into the destination buffer; if n was actually larger than
the buffer size, the pointer arithmetic to compute the buffer end
pointer was undefined. this affected sprintf, which is implemented in
terms of snprintf, as well as some unusual but valid direct uses of
snprintf.
instead, setup the FILE as unbuffered and have its write function
memcpy to the destination. the printf core sets up its own temporary
buffer for unbuffered streams.
commit 6ffdc4579f set lnz in the code
path for non-zero digits after a huge string of zeros, but the
assignment of dc to lnz truncates if the value of dc does not fit in
int; this is possible for some pathologically long inputs, either via
strings on 64-bit systems or via scanf-family functions.
instead, simply set lnz to match the point at which we add the
artificial trailing 1 bit to simulate nonzero digits after a huge
run of zeros.
this patch fixes a large number of missed internal signed-overflow
checks and errors in determining when the return value (output length)
would exceed INT_MAX, which should result in EOVERFLOW. some of the
issues fixed were reported by Alexander Cherepanov; others were found
in subsequent review of the code.
aside from the signed overflows being undefined behavior, the
following specific bugs were found to exist in practice:
- overflows computing length of floating point formats with huge
explicit precisions, integer formats with prefix characters and huge
explicit precisions, or string arguments or format strings longer
than INT_MAX, resulted in wrong return value and wrong %n results.
- literal width and precision values outside the range of int were
misinterpreted, yielding wrong behavior in at least one well-defined
case: string formats with precision greater than INT_MAX were
sometimes truncated.
- in cases where EOVERFLOW is produced, incorrect values could be
written for %n specifiers past the point of exceeding INT_MAX.
in addition to fixing these bugs, we now stop producing output
immediately when output length would exceed INT_MAX, rather than
continuing and returning an error only at the end.
if the requested precision is close to INT_MAX, adding
LDBL_MANT_DIG/3+8 overflows. in practice the resulting undefined
behavior manifests as a large negative result, which is then used to
compute the new end pointer (z) with a wildly out-of-bounds value
(more overflow, more undefined behavior). the end result is at least
incorrect output and character count (return value); worse things do
not seem to happen, but detailed analysis has not been done.
this patch fixes the overflow by performing the intermediate
computation as unsigned; after division by 9, the final result
necessarily fits in int.
we inherited from TRE regexec code that's utterly wrong with respect
to the integer types it's using. while it doesn't appear that
compilers are producing unsafe output, signed integer overflows seem
to happen, and regexec fails to find matches past offset INT_MAX.
this patch fixes the type of all variables/fields used to store
offsets in the string from int to regoff_t. after the changes, basic
testing showed that regexec can now find matches past 2GB (INT_MAX)
and past 4GB on x86_64, and code generation is unchanged on i386.
most of the possible overflows were already ruled out in practice by
regcomp having already succeeded performing larger allocations.
however at least the num_states*num_tags multiplication can clearly
overflow in practice. for safety, check them all, and use the proper
type, size_t, rather than int.
also improve comments, use calloc in place of malloc+memset, and
remove bogus casts.
since cpu sets can be dynamically allocated and have variable size,
accessing their contents via ->__bits is not valid; performing pointer
arithmetic outside the range of the size of the declared __bits array
results in undefined beahavior. instead, only use cpu_set_t for
fixed-size cpu set objects (instantiated by the caller) and as an
abstract pointer type for dynamically allocated ones. perform all
accesses simply by casting the abstract pointer type cpuset_t * back
to unsigned long *.
previously, fflush_unlocked was an alias for an internal backend that
was called by fflush, either for its argument or in a loop for each
file if a null pointer was passed. since the logic for the latter was
in the main fflush function, fflush_unlocked crashed when passed a
null pointer, rather than flushing all open files. since
fflush_unlocked is not a standard function and has no specification,
it's not clear whether it should be expected to accept null pointers
like fflush does, but a reasonable argument could be made that it
should.
this patch eliminates the helper function, simplifying fflush, and
makes fflush_unlocked an alias for fflush, which is valid because the
two functions agree in their behavior in all cases where their
behavior is defined (the unlocked version has undefined behavior if
another thread could hold locks).
commit b91cdbe2bc, in fixing another
issue, changed the logic for how alt-form octal adds the leading zero
to adjust the precision rather than using a prefix character. this
wrongly suppressed the zero flag by mimicing an explicit precision
given by the format string. switch back to using a prefix character.
based on bug report and patch by Dmitry V. Levin, but simplified.
Rich Felker